ScopTel Yealink

Yealink Distinctive Ringing Configuration

ScopTEL supports Distinctive Ringing Configurations for:









This document explains how to configure Yealink phones.

    • Related Articles

    • ScopTEL - Yealink Distinctive Ringing Configuration

      Purpose Create a unique custom ring tone for each Yealink phone on the network Pre-Requisites scopserv-telephony25- .wav files encoded in PCM Uncompressed 16 bit, 8K sampling, Mono Using free software such as: ...
    • ScopTEL - DHCP APS Configuration

      DHCP Configuration DHCP detection of new devices when the ScopTEL DHCP server is the only DHCP server on the LAN. During DHCP acquisition a newly installed and supported SIP device can be added to the APS list automatically. DHCP discovery can ...
    • Yealink Phones do not download provisioning files after updating to scopserv-telephony25-

      During the finalization of APS support for Yealink Version 72 firmware, ScopServ included a configuration line in Yealink <MAC>.cfg files which broke the phone’s ability to download edited <MAC>.cfg files after the initial configuration download.  ...
    • ScopTEL IP PBX Software - Vegastream Analog Gateway Configuration

      FXO interfaces Also known as POTS line (Plain Old Telephone Service). Also known as 1fl (1 family line). Each FXO line can support one conversation between two parties (Tx and Rx Transmit and Receive). Most business use ‘equivalent lines’ placed into ...
    • Module 6 - ScopTEL IP PBX Software - Incoming Lines Management

      Incoming Lines | Background Information Incoming Lines types are typically: “Extension (DNIS)” which are received numbers from SIP/IAX2 or PRI trunks. “Block” (a configured list of DNIS numbers). DNIS (Dialed Number Information Service). The service ...