ScopTEL Share Extension

How to Share One Extension With Multiple SIP Devices

Description: Shared Users for Devices

  • In many cases it is desirable to have an extension shared across multiple devices. For example you have an extension 100 and you want it registered to multiple SIP User Agents such as: SIP Soft Phone, Wireless SIP Phone (DECT, WiFi), SIP Desk Phone. When someone calls extension 100 you want all devices to ring or ring with unique ring tones or just blink because you are monitoring extension 100 for someone else.

Normally a SIP extension can only be bound to a single IP address so you cannot share an extension with multiple SIP phones or there will be IP address conflicts.  ScopServ has introduced a new feature to solve this problem.  Follow this official documentation if you want to enable Shared Devices for Extensions




    • Related Articles

    • ScopTEL - Shared Users for Devices

      Shared Users For Devices In many cases it is desirable to have an extension shared across multiple devices. For example you have an extension 100 and you want it registered to multiple SIP User Agents such as: SIP Soft Phone, Wireless SIP Phone ...

    • Product Bulletin: ScopServ releases chan_pjsip to replace deprecated chan_sip

      Product Bulletin: ScopServ releases chan_pjsip to replace deprecated chan_sip As per Sangoma's official product announcement chan_sip is officially deprecated. ScopServ's officially supported release of Asterisk is 18.x so this effects all ScopTEL ...

    • Module 8 - ScopTEL IP PBX Software - Extensions Management

      Security | Background SIP Phones are SIP User Agents. For security, SIP User Agents must register to the SIP Registrar via username and password authentication. It is typical for the SIP protocol ports to be open or forwarded to the ScopTEL server if ...

    • ScopTEL - Cisco SIP Phone Integration

      Cisco Phone Background Cisco is known for their SCCP Protocol, however they have acquired several companies over the years and have developed SIP firmware for use in their proprietary call control platforms and Third Party Call Control (3PCC). One of ...

    • How to recover Shared Storage (DRBD) from split brain

      After split brain has been detected, one node will always have the resource in a StandAlone connection state. The other might either also be in the StandAlone state (if both nodes detected the split brain simultaneously), or in WFConnection (if the ...