ScopTEL Sip Trunking

How to Configure Server to Server SIP Trunking

Server to server SIP trunks are very useful and easy to configure.

DNIS is used to send and receive calls between servers

Usage Cases Implementing DNIS:

  • SIP TIE trunks:
    • A private network is created to dial extensions between systems using Access Codes
  • Tandem Dialing:
    • PSTN resources available to a remote server are shared to the local server
  • PSTN re-routing to a networked ScopTEL Server



    • Related Articles

    • How to establish a SIP trunk between ScopTEL IP PBX and Microsoft Lync

      We will see in this article how to configure a Scopserv system so it can communicate with Microsoft Lync/OCS Two steps are required in order to use an external link, and two other steps are optional: Creation of a VoIP Account Creation of an incoming ...

    • ScopTEL IP PBX Software - Basic Installation Hierarchy for Telephony Server

      Basic Installation Hierarchy for Telephony Server Therefore the purpose of this document is to provide a visual walkthrough of a very basic but functional installation for one tenant. This tutorial does not include an overview of the overall network ...

    • How to Make Anonymous Calls From a SIP Trunk

      How to Make Anonymous Calls From a SIP Trunk Ever wanted to hide your outgoing Caller ID and make your calls Anonymous? Refer to this knowledge base document.

    • VoIP.ms Interoperability With ScopTEL

      ScopTEL Software Prerequisites: You must have a valid copy of the ScopTEL software Minimum software release scopserv-telephony25-6.9.1.6.20191218-1 VoIP.ms Account Settings|Security You require an active SIP account with voip.ms to register a ScopTEL ...

    • Module 3 - ScopTEL IP PBX Software - Server Installation Wizard

      "root" login In order to login to the Linux CLI you must login as the root user Type root Enter the default root password ‘scopserv’ omitting the ‘ To change the default root password then after a successful root login type ‘passwd’ omitting the ...