How to Configure ITSP Trunks For ScopTEL CPE Customers
Scenario: You are an ITSP peered with carriers to supply SIP trunks to customers using ScopTEL servers.
You will need to set up VoIP Account forwarding and DNIS configurations to steer calls
Related Articles
How to establish a SIP trunk between ScopTEL IP PBX and Microsoft Lync
We will see in this article how to configure a Scopserv system so it can communicate with Microsoft Lync/OCS Two steps are required in order to use an external link, and two other steps are optional: Creation of a VoIP Account Creation of an incoming ...
Module 4 - ScopTEL IP PBX Software - PSTN Interfaces and Gateways
Gateways A VoIP gateway is as a bridge between: Interfaces: (T1/E1, FXO, FXS) Protocols: SIP, Cisco SCCP/Skinny, MGCP (legacy protocol), and H.323 (legacy protocol) CODECS (media): GSM (13 Kbps), iLBC (15 Kbps), G.711 (64 Kbps), G.722 (48/56/64 ...
ScopTEL IP PBX Software - Basic Installation Hierarchy for Telephony Server
Basic Installation Hierarchy for Telephony Server Therefore the purpose of this document is to provide a visual walkthrough of a very basic but functional installation for one tenant. This tutorial does not include an overview of the overall network ...
Enable Instant Messaging (XMPP) Service on ScopTEL PBX
We will look at how to setup an Instant Messaging server on ScopTEL PBX using a free and open source XMPP based IM server. Openfire is a real time collaboration (RTC) server dual-licensed under the Open Source GPL and commercially. It uses the only ...
How to implement Skill Based Routing (ACD) on ScopTEL PBX
Skills Based Routing Definition The following is the Wikipedia definition for Skills Based Routing: “Skills based routing (SBR) is a call assignment strategy used in call centers to assign incoming calls to the most suitable agent, rather than simply ...